Bikes

The Gazelle Medeo T9 City is our active electric bike that takes you everywhere. Specced with the reliable and quiet Bosch Active Line motor and 9-speed external derailleur, every hill will feel as flat as Holland. Powerful front and rear lighting plus a sturdy rear rack will inspire riders to swap their car for this bike for both day and nighttime trips. Enjoy every mile of the ride thanks to a roomy low-step frame, comfortable geometry, and wide tires. The Medeo City is a great value and perfect introduction to e-bike life.

The Medeo T9 HMB electric bike is the ideal companion to feel the wind in your face and forget about the past while falling in love with bikes all over again. Experience the freedom of a country road and let the powerful motor conquer your worries along with any terrain you may encounter. The combination of high- quality components and a comfortable and easy to ride electric bike result in the ideal package to make your childhood dreams come true.

The Gazelle Ultimate C380+ HMB is the ultimate electric bike to take on any task, errand, or adventure. Equal parts sporty urban bike and comfortable touring bike, and powered by Bosch's formidable Performance Line Speed motor, this Gazelle goes the distance. The exquisitely formed frame, elegant lines, and integrated battery offer a sleek look and capable handling. Spec'd with the Enviolo 380 trekking internal gear hub, the stepless shifting creates an easy riding experience in any conditions. The Gates belt drive is whisper-quiet, and multiple comfort features ensure an exceptional ride-feel.

HAUL ASS, NOT CARGO A new breed of rider is emerging-one who loves the freedom and exploration that gravel culture was founded upon but who has a hunger to ride hard, to go all out, and to explore not just geography but personal limits. This frontier requires a new kind of gravel machine, one engineered not to roam the trails, but to race them. For these athletes, we engineered Aspero for pure, unapologetic speed, ready to take down finish lines, KOMs, PRs, and FKTs. A bike built without limits, for the riders looking to test them. It's stiff, Classics-racing stiff, and performs like you'd want a road bike to perform off-road. We think that makes sense, and it's what we were trying to do when we were stuffing bigger tires into our existing frames and swapping in aftermarket forks to get a 40mm tire up front. The flip-chip in the fork-we call it the Trail Mixer-keeps the trail measurement consistent whether you choose 700c or 650b tires. This maintains the bike's personality and handling characteristics when you switch from mid-fats to full-fat. There are as many different ways to do gravel as there are gravel bikes these days, but if you're toeing the start line, looking to stay with the lead group, and contend for the victory, Aspero is the bike to get you there.

WELCOME TO THE ERA OF SPEED IN GRAVEL. A new breed of rider is emerging—one who loves the freedom and exploration that gravel culture was founded upon but who has a hunger to ride wild, to go full bore, and to explore not just geography but personal limits. This frontier requires a new kind of gravel machine, one engineered not to roam the trails, but to slay them. For these athletes, we created a machine engineered for pure, unapologetic speed—ready to take down finish lines, KOM leaderboards, PR’s, and FKT’s. A single bike that first generates maximum speed, then controls that speed across the variable conditions gravel athletes must conquer. A machine built without limits, for the riders willing to test them. ROAD RACING INSPIRED. GRAVEL RACING REFINED. It’s time to change the paradigm of gravel bike design from hauling gear slowly to empowering athletes quickly. Leveraging vast knowledge from road racing, the Aspero frame is designed with world tour stiffness for greater pedal power transfer, using less and lighter material to aid climbing and accelerating, while maximizing speeds with aerodynamic shapes critical to efficiency at speed. The Aspero lets you choose the tire that best suits the terrain so you're always in control, with clearance for 700c x 42 or 650B x 49 combinations. Since different outside rolling diameters of various wheel and tire combinations affect the bike handling, the fork includes a "Trail Mixer" design that adjusts trail to lessen the impact on handling when swapping between most common tire sizes. - Aspero full carbon frame and fork - Shimano GRX 815 Di2 drivetrain - Reserve 32mm carbon rims / DT350 hubs - Easton EC70 carbon bars and seatpost

HAUL ASS, NOT CARGO A new breed of rider is emerging-one who loves the freedom and exploration that gravel culture was founded upon but who has a hunger to ride hard, to go all out, and to explore not just geography but personal limits. This frontier requires a new kind of gravel machine, one engineered not to roam the trails, but to race them. For these athletes, we engineered Aspero for pure, unapologetic speed, ready to take down finish lines, KOMs, PRs, and FKTs. A bike built without limits, for the riders looking to test them. It's stiff, Classics-racing stiff, and performs like you'd want a road bike to perform off-road. We think that makes sense, and it's what we were trying to do when we were stuffing bigger tires into our existing frames and swapping in aftermarket forks to get a 40mm tire up front. The flip-chip in the fork-we call it the Trail Mixer-keeps the trail measurement consistent whether you choose 700c or 650b tires. This maintains the bike's personality and handling characteristics when you switch from mid-fats to full-fat. There are as many different ways to do gravel as there are gravel bikes these days, but if you're toeing the start line, looking to stay with the lead group, and contend for the victory, Aspero is the bike to get you there.

HAUL ASS, NOT CARGO A new breed of rider is emerging-one who loves the freedom and exploration that gravel culture was founded upon but who has a hunger to ride hard, to go all out, and to explore not just geography but personal limits. This frontier requires a new kind of gravel machine, one engineered not to roam the trails, but to race them. For these athletes, we engineered Aspero for pure, unapologetic speed, ready to take down finish lines, KOMs, PRs, and FKTs. A bike built without limits, for the riders looking to test them. It's stiff, Classics-racing stiff, and performs like you'd want a road bike to perform off-road. We think that makes sense, and it's what we were trying to do when we were stuffing bigger tires into our existing frames and swapping in aftermarket forks to get a 40mm tire up front. The flip-chip in the fork-we call it the Trail Mixer-keeps the trail measurement consistent whether you choose 700c or 650b tires. This maintains the bike's personality and handling characteristics when you switch from mid-fats to full-fat. There are as many different ways to do gravel as there are gravel bikes these days, but if you're toeing the start line, looking to stay with the lead group, and contend for the victory, Aspero is the bike to get you there.

FLAT OUT That's how Aspero debuted under the characters of the Wednesday Night Rough Club two years ago, and that's how it's stayed. And since, at Cervelo, we know that flat out doesn't stay flat out for long without a little help from science, we've come back from the drawing board with a new Aspero. A faster Aspero, a lighter Aspero, and-dare we say it-an even better looking Aspero. Our engineers like to say, if it looks fast, it probably is, but there's some truth to it, and Aspero-5 looks fast standing still. No cables in the wind, tubes derived from our library of aerodynamically proven shapes, and just a hint of a cut out in the seat tube to squeak out just a bit more tire clearance, add up to a bike that proves the adage.

A BIKE FOR THE WAY RIDERS RIDE Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. When we design a bike, we start with our library of tube shapes. These shapes are tubes we've used on other models that we know to have various qualities-aerodynamic, stiff, ultralight, etc.-and they help get us to the refinement stage on a bike more quickly. In the case of Caledonia, we wanted durability, lightweight, and aerodynamics to be in balance and selected a package that achieved the performance demands of this kind of race bike. Caledonia uses a standard round bar, stem, and seat post, giving riders the option to build their ultimate ride without compromise. Integrated accessory mounts and hidden fender mounts keep the bike's refined lines so you can ride with lights and computers in a downpour and still look fast. Because we all know if it looks fast, it probably is. Rather than designing multiple versions of the bike with various fit profiles (R5, R-Series, etc.) like we've done in the past, we designed a system that enables a broad range of fits on a single bike while maintaining the aesthetic and functional cleanliness we demand. Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun. By placing lower modulus carbon in key areas to mitigate the brittleness of hi-mod fiber-the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders.

Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun - the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. - Removable FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. - Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

A BIKE FOR THE WAY RIDERS RIDE Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. When we design a bike, we start with our library of tube shapes. These shapes are tubes we've used on other models that we know to have various qualities-aerodynamic, stiff, ultralight, etc.-and they help get us to the refinement stage on a bike more quickly. In the case of Caledonia, we wanted durability, lightweight, and aerodynamics to be in balance and selected a package that achieved the performance demands of this kind of race bike. Caledonia uses a standard round bar, stem, and seat post, giving riders the option to build their ultimate ride without compromise. Integrated accessory mounts and hidden fender mounts keep the bike's refined lines so you can ride with lights and computers in a downpour and still look fast. Because we all know if it looks fast, it probably is. Rather than designing multiple versions of the bike with various fit profiles (R5, R-Series, etc.) like we've done in the past, we designed a system that enables a broad range of fits on a single bike while maintaining the aesthetic and functional cleanliness we demand. Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun. By placing lower modulus carbon in key areas to mitigate the brittleness of hi-mod fiber-the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders.

A BIKE FOR THE WAY RIDERS RIDE Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. When we design a bike, we start with our library of tube shapes. These shapes are tubes we've used on other models that we know to have various qualities-aerodynamic, stiff, ultralight, etc.-and they help get us to the refinement stage on a bike more quickly. In the case of Caledonia, we wanted durability, lightweight, and aerodynamics to be in balance and selected a package that achieved the performance demands of this kind of race bike. Caledonia uses a standard round bar, stem, and seat post, giving riders the option to build their ultimate ride without compromise. Integrated accessory mounts and hidden fender mounts keep the bike's refined lines so you can ride with lights and computers in a downpour and still look fast. Because we all know if it looks fast, it probably is. Rather than designing multiple versions of the bike with various fit profiles (R5, R-Series, etc.) like we've done in the past, we designed a system that enables a broad range of fits on a single bike while maintaining the aesthetic and functional cleanliness we demand. Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun. By placing lower modulus carbon in key areas to mitigate the brittleness of hi-mod fiber-the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders.

A NEW BIKE FOR CLASSIC RIDES We don't see road bikes as delicate machines meant only for putting watts into and receiving speed from. They're an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it's seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. The Caledonia is the bike we keep reaching for when we know the odometer's going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We developed the Caledonia-5 in collaboration with our World Tour riders to satisfy the need for a dedicated cobbles bike. Faster handling isn't necessarily better-we engineered the handling based on the specific use-case. In this case, it's Roubaix. Roubaix is harder on bikes than any other race on the calendar, and there's zero margin for error. We increased the rear center, lowered the BB, and increased the trail. The handling is still fast, but we've added stability. Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun. By placing lower modulus carbon in key areas to mitigate the brittleness of hi-mod fiber-the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders.

WHAT GOES UP MUST COME DOWN R5 has one job—get to the top, fast. But for all the glory and fanfare that comes with a summit finish, they're rarely the only climb of the day. And while a race isn't usually won on a descent, they can certainly be lost. A climbing bike that can't carve a hairpin is a bit like a cup of decaf coffee. This is the fourth iteration of the R5, and while weight and stiffness have varied over the years, the handling, poise, and unmatched prowess on a descent have been consistent since day one.

The Soloist. It's a name from deep in our history, but immediately familiar to anyone with bike racing memories extending back to the early-2000s. It was the weapon of choice for top World Tour contenders on CSC and the Cervelo Test Team, and we're bringing it back for a new generation. The new Soloist is designed for the week-in, week-out rider and racer who can only justify one high-performance bike. It balances light weight and aerodynamic advantages to deliver a bike that really is 'just right'. Soloist comes in a hair lighter than S5, but significantly more aerodynamic than R5, and borrows the threaded bottom bracket standard you find on the R5-CX. It's a race bike that can accommodate mechanical and electronic shifting, can hammer out the training miles in all weather, and yet still has the chops to leap off the front at that decisive moment. That's the Soloist.

We took our CRS complete and gave it a new-school street injection in the form of a SALT PRO sealed freecoaster hub. Now with a sealed front hub and available in two color options, this entry-level freecoasting whip is ready for anything.

Bridge Club is a highly versatile touring bike that perfectly hits the sweet spot, spanning on- and off-road excursions. Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods. Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too! - Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist - Two build kit options: Pavement (700c) and Off-Road (27.5-inch) - Run racks and panniers, framebags, or all of the above - Disc brake-specific, single position, vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm tires (with or without fenders), 27.5 x 2.80 tires (27.5 x 2.60 with fenders), and 26 x 3.0 tires (26 x 2.80 with fenders)

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)

Bridge Club is a highly versatile touring bike that perfectly hits the sweet spot spanning on- and off-road excursions. Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods. Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too! - Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist - Two build kit options: Pavement (700c) and Off-Road (27.5-inch) - Run racks and panniers, framebags, or all of the above - Disc brake-specific, single position, vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm tires (with or without fenders), 27.5 x 2.80 tires (27.5 x 2.60 with fenders), and 26 x 3.0 tires (26 x 2.80 with fenders)

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single-track, double-track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hubs and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay-mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single-track, double-track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hubs and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay-mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single track, double track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hub and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

Ice Cream Truck solves the problem of having to choose between a fat bike and a trail bike. It boasts a symmetric 190mm-spaced Chromoly frame, suspension-corrected 150mm-spaced fork, and sporty trail-oriented geometry. Supported by massive 4.8-inch tires, it's ready to deftly tackle nearly any terrain. - 100% Surly Chromoly steel with 44mm headtube and internal dropper post cable routing - Frame is E.D. Coated for increased life expectancy - 1-1/8-inch straight steerer fork, Chromoly steel - 100mm threaded bottom bracket shell - Front and rear thru-axles, non-offset