Seatposts

Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.

Crafted from 2014 aluminum, Specialized's Pro 2 Alloy MTB Seatpost is tough and light. The laid-back, single-bolt adjusting clamp holds fast and makes attaching and positioning the seat a cinch. And, the anodized finish looks great, too.

Light, high-tech and comfortable, Specialized's S-Works Carbon Seatpost will improve your ride. It's built of Specialized's FACT carbon for a feathery weight and impressive strength and durability. Plus, the post features a cylindrical head assembly that's simple to adjust fore/aft and tilt with a single bolt. The S-Works seatpost comes in a 400mm length with zero or 20mm setback, as well as a 350mm length with 20mm setback.

Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Seatpost the lightest post we've ever seen that passes our standards. At 136 grams (27.2mm x 300mm), it's about as light as you'll find. Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist 2-bolt micro-adjust clamp with extended saddle cradle ensures precision fit and secure retention. Available in two sizes, 27.2mm x 300mm and 27.2mm x 360mm, each with a 12mm setback. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - 136 grams (27.2mm x 300mm), - 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. - Advanced composite construction delivers light weight and reliability. - Available in two sizes: 27.2mm x 300mm x 12mm offset, 27.2mm x 380mm x 12mm offset - No-Fault crash replacement policy. Lifetime warranty - System Weight Limit: 275lbs / 125kg

Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish

The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types. - Distinctive Zipp cosmetics - Unidirectional Carbon fiber tuned for ride comfort - Lightweight clamping system - Lifetime warranty

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets. - Convenient finger adjustment of saddle angle - Unidirectional carbon shaft, forged aluminum head - No rider weight limit - 5 year Whisky warranty - ASTM Condition 3 - For rough off-road riding and jumps less than 24"

Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head

WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.

WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.

The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.

Syntace's HiFlex full carbon seatpost is centered around a highly technical carbon design that evenly distributes rider load as well as damps vibrations without loss of control. Its extra-deep 52mm bottom clamp offers optimal rail support while a shallow 30mm top clamp allows for extra fore-aft adjustment. The two-bolt micro adjust clamp offers precise saddle angle adjustments and features bolts arranged in line with the direction of bump forces for increased strength Ideal for anything from road to mountain. - Improved vibration damping and directional stability - Bob-damping mechanism for full suspension bikes - Compatible with most Carbon rails - Weight: 212g - Max. Height: 310mm - Min. Height: 40mm

Sunday Bikes pivotal seatpost.

Stolen Thermalite Pivotal Seatpost. Thermalite is proprietary material made with Nylon 66 base w/ 50% longer glass fiber infusion. Thermalite posts are 30% lighter than the current Alloy posts on the market. - Dupont Nylon 66 with 50% longer glass fiber infusion - 1/3 lighter than any alloy post on the market - Compatible with all Pivotal seats - Weight: 2.8oz.

This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options. - FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6. - Engineered to have the saddle move in a perfect arc, aka a back & downward motion. - Setback: 20mm/0mm - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Length: 380mm/450mm - Approximate Weight: 209g

This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options: 0mm and 20mm. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.

This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside.

- Aerodynamic FACT carbon construction that’s compatible with the 2019 Venge - Sleek Di2 integration hides the Di2 junction box inside - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt

The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head

The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head

The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head

Salsa's Regulator Ti Seatpost delivers the maximum comfort and performance of titanium, along with the convenience of independent adjustment of saddle angle and fore/aft positioning. This post is built for the long haul with specifically designed, stainless steel bolts, as well as CNC'd aluminum head internals and saddle clamps to provide the ultimate in strength and durability. - 3/2.5 titanium with a brushed finish - Length: 410mm - Proprietary head design allows independent saddle angle and fore/aft positioning - Small, lightweight head design uses CNC-machined AL-6061 internals with stainless steel threaded stud to prevent thread stripping - CNC-machined AL-7075 saddle clamps - Specially designed, stainless steel bolts provide ultimate strength and durability *NOTE: Not for use with carbon seat rails or ovalized seat rails

The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g

- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware - Remote Position: On handlebar - Cable Routing: Internal - Offset: 0mm - Clamp Type: Standard, double bolt - Seat Post Material: Aluminum - Seat Post Weight: 510g